Category: Services

The term “party for a cause” is all the rage, the gratification of giving to the less fortunate and the socialization with people who feel the same way.

Most party planners in Toronto who are asked to throw this kind of party take the issue of what promotional product to give away seriously. Parties that revolve around charity events always have major sponsors who see the whole event as a way to get their names out there.

Some of the best products that companies can use to pimp their logos are:

1. USB drives
2. fountain pens (not ballpoint pens)
3. trendy bags
4. Apparel (shirts, socks, watches)
5. visors and caps

Food And Entertainment

The food and the entertainment must be topnotch, delicious and unique. People who attend these types of parties are willing to pay the exorbitant fee in the name of charity as long as they are well fed, will have fun and will be able to share in the thrill of winning raffles or being given awards (best dressed, etc).

Why not be unique and hire a virtual reality rental company, such as Levelup Reality and have virtual reality fun and games. Levelup Reality is a Toronto company that provides high quality virtual reality equipment. They offer a variety of options including headsets, controllers, huge games library and other accessories.

Virtual Reality (VR) technology allows players to immerse themselves into a virtual world. This can be done through headsets such as Oculus Rift, HTC Vive, Playstation VR, or Google Cardboard. VR games are usually played using a controller that has motion sensors built-in. These sensors track your movements and translate them into actions within the game.

Let’s face it, when it comes to tools, more is better, you will always come across situations that will be easier with tools that you don’t have. I won’t discuss safety equipment here, that is a whole other article.

Your New Welding Mask

To start with the obvious, the welding mask. This is one time that I will say, you don’t need to buy the absolute top of the line. A welding helmet is a personal choice, but I would make two suggestions. The first, get as big of a view port as possible, the 4”x4” are very nice to use. Unfortunately, if you want an auto darkening helmet, they don’t come that big.

The second piece of advice I have is to get one with enough space behind it for a filter mask. I would always recommend a filter mask if you are using flux cored wire or especially if you plan to weld Aluminum. Most garages aren’t as well ventilated as they could be and after an afternoon of welding Aluminum without some kind of filter, you will be feeling sick.

The next piece of machinery you need is an angle grinder. Don’t waste money on the big 7”, unless you plan to weld some serious steel. A 4.5” or 5” are relatively cheap, light enough to use and common enough that the disks are fairly inexpensive. A note on the disks, get one cutting disk but for grinding, flex-disks work the best.

A Makita Angle Grinder

There are some hand tools you should also have before you start. Definitely a wire brush is necessary (stainless bristles are best for Aluminum since they won’t contaminate it, but they are expensive). If you are using a stick welder, a chipping hammer is good to have, but a cold chisel will also work, if you are using gas the hammer isn’t necessary.

Vise Grips will make your life easier and will make it so you don’t burn your fingers as much. If you are using a MIG gun, a pair or wire cutters, needle nose pliers and a small flat head screw driver are must haves, because once in a while the wire will stick to the tip and you will need to do some dismantling.

The final piece of equipment that will make your life easier, though it is costly and a bit of a luxury is a chop saw, this will make cutting angels a lot easier and make your work look a lot nicer. Additionally, when the angels are precise, welding them together is a whole lot easier.

There will always be something that one person prefers and others don’t but with these few tools, you will be ready to start welding without too many surprises.

So let’s do a quick recap of the tools you’ll need:

• Welding mask.
• Angle grinder.
• Wire brush.
• A chipping hammer (if you’re a stick welder).
• Vise grips.
• Wire cutters, needle nose pliers and a small flat head screw driver (if you’re a MIG gunner).
• Chop saw.

If you have more questions on welding machines or if you have a project that has gotten beyond your means, check out the professionals –  arktekindustries.com.au.

Detroit commercial locksmith provide a wide range of high security lock and key solution as well. They will put all their experience to make sure that your business got the maximum security and safety as possible.

If your property required to re-key your commercial locks for any reason, or you need a master key system installed to make your life easier, even a access control or emergency panic bar installed Commercial Locksmith can help.

You should know that professional locksmith can give you the best solution on what are actually the best product to use for different security situations.

You always need to employ the professionals, and always make sure that you get detailed quote before you make any work in your property. Therefore, if you are liable employee call a local Detroit locksmith company for repair or replacement locks, or any other security system for your business. Preferred way is to select a local company with a long experience in your area.

Commercial locksmith in Detroit can cover all your lock and security issues with best customer service guarantee.

Commercial locksmith in Detroit will provide you the most professional mobile commercial locksmith that can provide all the parts and expertise to secure your business, warehouse, or commercial property with the newest security hardware.